How To Program Ford Key Fobs

Did you recently get replacement car keys and find yourself wondering about how to program Ford key fobs? Susanville Ford has you covered! Many new Ford vehicles come with a remote key fob for easier vehicle access. Programming a key fob for your Ford is simple if your car is equipped with keyless entry, and you know the steps. Take a moment to learn about Ford key fob programming with Susanville Ford in Susanville. Then, if you have more questions, contact us! We’re ready to answer all of our Janesville neighbors’ questions about Ford technologies!

Step-By-Step Ford Key Fob Programming Instructions  

If you just replaced your Ford Key fob in Chester, and you’re wondering about the steps of programming a key fob for your Ford, they’re fairly straightforward. Just follow these instructions on how to program a Ford key fob: 

1. Close the car doors, and then open the driver-side door. Press the UNLOCK button on the driver-side door. 
2. Next, turn the ignition from OFF to RUN 8 times. Do this within 10 seconds, making sure the 8th time ends on RUN. When you’ve entered programming mode, the door locks will lock and unlock. (Note: If the doors don’t cycle, turn the key faster. Your car may not have keyless entry if you still can’t get the door locks to cycle.) 
3. Press any button on the Ford remote to be programmed. Do this within 8 seconds. The door locks will cycle again to confirm the keyless entry remote is programmed and ready to use. 
4. Have a second remote key fob? Again, press any button on the remote within 8 seconds to cycle the door locks. Repeat this step for any additional key fobs. 
5. Finally, turn the ignition to OFF. The locks will again cycle to confirm programming is complete. 

How To Turn Off Ford MyKey

Whether you’re selling your vehicle or exchanging your Ford key with a new teen driver, there are many reasons you might want to disable your programmed Ford key. To do so, the vehicle needs to be started with your main admin key or admin key fob. After doing so, you’ll just need to follow the step-by-step instructions below to clear your programmed keys’ settings and return each key to its original “admin key” status:

• Start your vehicle and allow your computer and screen to turn on.
• Using your steering wheel-mounted controls, press the left arrow button to access the main menu.
• From the main menu, press “Settings” after selecting “OK.”
• Once you’re at the “Settings” screen, scroll until you find the “MyKey” option, then press “OK.”
• Under “MyKey,” find the option that says “Clear MyKey.”
• After selecting “Clear MyKey,” press and hold “OK” until you get the “All MyKeys Cleared” message on the screen.

Have Questions About Programming A Key Fob For Your Ford? 

Do you have questions about how to program a Ford key fob? Don’t hesitate to contact Susanville Ford by calling . Our specialists are on standby and eager to help our Standish neighbors troubleshoot the steps of Ford key fob programming. Before you go, explore our other Ford parts and service tips for all kinds of helpful reads! And if you’re due for a tune-up, be sure to explore our Ford service specials to see how much you can save!

Disclaimer: These recommendations may become outdated over time or differ from recommendations for older vehicles. To ensure accuracy, always consult your owner’s manual or a certified OEM mechanic.